Wall-to-Wall Carpet Installation in Nashville and Middle Tennessee
Carpet Installation

Wall-to-Wall Carpet Installation

Wall-to-wall carpet installed edge to edge with tackless strip, padding and a tight stretch for a seamless, warm surface through a room, a level or an entire home.

Wall-to-wall carpet is broadloom installed from one wall to the opposite wall, held by tackless strip around the edge and stretched over cushion. It gives a continuous, soft surface that quiets rooms, warms bare feet and hides slightly uneven floors. Owners in Nashville choose it for bedrooms, family rooms, finished basements and stairs where comfort and sound control matter most.

We begin with a Free Estimate, measuring each room and noting doorways, closets, vents and the shape of the walls. We plan the cuts so the carpet runs the same direction across connected rooms, then install tackless strip and pad, stretch the carpet in stages and trim it to the wall. You get a written scope that lists the carpet, the pad, the seams and the transitions, so the job is clear before work begins.

Edge-to-edge layout

The carpet is planned to run in one direction so the pile catches light evenly, and cuts are made to follow the walls without gaps.

Strip around the perimeter

Tackless strip is fastened near each wall at the right gap, which is what holds the stretched carpet in place for the long run.

Staged stretching

We stretch from one side of the room to the other, then check across corners and doorways, so tension is even everywhere.

Closets and doorways

Closets, jambs and doorways get the same careful cutting and finishing, so the carpet looks complete even where most people never look.

What is included

  • Perimeter strip installation
  • Padding with taped joints
  • Staged power stretching
  • Closet and doorway cutting
  • Transition strips
  • Final trim and cleanup
Before and after

See the transformation.

Drag the handle to compare.

After: a living room carpet with a fresh, clean, new soft carpet with an even pile, tidy edges and a warm, finished lookBefore: a living room carpet with an old, worn and matted beige carpet with flattened traffic lanes, stains and visible wear in a family roomBeforeAfter
A worn, matted, stained old carpet replaced with a fresh new plush carpet. From an old, worn and matted beige carpet with flattened traffic lanes, stains and visible wear in a family room to a fresh, clean, new soft carpet with an even pile, tidy edges and a warm, finished look.
Why it works

What you get with Wall-to-Wall Carpet Installation

Measure every wall

Room shape, doorways, closets and vents recorded.

Choose carpet and pad

Style, color and cushion matched to the room.

Set the strip

Tackless strip fastened around the perimeter.

Lay the pad

Cushion rolled out with joints taped flat.

Stretch the carpet

Power stretched in stages across the room.

Trim and finish

Edges tucked, vents cut and transitions fitted.

Try it now

Carpet Fiber and Style Picker Quiz

Answer a few questions about traffic, pets, softness, moisture and style to see which carpet fibers usually fit.

How it works

Our process, start to finish.

  1. 01

    Call and describe it

    You tell us about your rooms and what you want the carpet to do, and we set a visit that fits your day.

  2. 02

    Walk and measure

    We walk the rooms, measure floors and stairs, check the subfloor and bring samples to look at in your own light.

  3. 03

    Choose and approve

    You pick the carpet and pad and receive a plain written scope with every room, extra and price before anything begins.

  4. 04

    Prepare the floor

    We move standard furniture, remove old carpet and pad and correct the subfloor so the new carpet has a good foundation.

  5. 05

    Install and stretch

    We lay strip and pad, stretch the carpet tight, seam it carefully and trim every edge and doorway.

  6. 06

    Walk through and review

    We clean up, return furniture, walk every room with you and explain how to care for the carpet.

Questions

Wall-to-Wall Carpet Installation FAQ

What is the difference between wall-to-wall carpet and a rug?

Wall-to-wall carpet is fastened to the floor edge to edge. A rug is a separate piece that sits on top of a floor and can be moved.

Can wall-to-wall carpet go over any floor?

It needs a sound, clean subfloor. Plywood and concrete are common, and we check the surface for damage, moisture and high spots before installing.

How is it held down?

Tackless strip around the edge holds a stretched carpet over padding. On some jobs, such as commercial spaces, carpet is glued down instead.

Will it show seams?

Carpet comes in wide rolls, so many rooms need no seam at all. When a seam is needed, we bond it and place it away from the main sight line.

How should I care for new carpet?

Vacuum regularly, blot spills quickly, use mats at entries and schedule periodic cleaning. We share simple care tips at the walk-through.

Next step

Get your Free Estimate for Wall-to-Wall Carpet Installation.

Tell us about your rooms and we will call you back to set up a visit.

Or call (615) 357-7797 to talk now.

Tell us about your rooms

We will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 357-7797. We never sell your information.

Call NowFree Estimate